Installation Guide

12
DOOR
Fig.A
Fig.B
PARTSREQUIRED:
x4
x1
48" x 96"
(121,9 x 243,8 cm)
2" (5,1 cm)
Flush
Flush
Flush
(2)Nails
(2)Nails
FLOOR PANELS
Install all oor panels with the painted grid lines facing up.
3/4"
(1,9 cm)
Floorpanelsare5/8"(1,6cm)thick.
Install (1) 48" x 96" panel on the wall frame, as shown.
Usethegaugeblocktomarkthe3/4"sidemeasurementoorjoist.
Secure panel with (2) 2" nails in the corners (Fig.A).
2
Move to the opposite end. Using the long edge of the panel as a lever,
movethepanelside-to-sideuntilyouhavea3/4"measurementontheoorjoist.
Secure corner with (2) 2" nails (Fig.B).
BEGIN
1
3/4"GAUGE
BLOCK