Installation Guide

31
3" (7,6 cm)
PARTSREQUIRED:
RAFTER INSTALLATION
x4 x2
x20
BEGIN
¸
1
Preassembled
Preassembled
(1) GUSSET
MEASUREMENTS ARE TO CENTER
OF RAFTER
Secure rafters to top plate with (2) 3" screws in each rafter end (Fig.A,Fig.B).
- Note single-gusset rafters at front & back walls with gusset facing inward.
Secure single-gusset rafters to top plate with (1) 3" screw in each rafter end (Fig.C).
Fig.A
Alignover
studs.
Install
end-rafters
Flushtooutside
ofpanel
Fig.C
Installrafters
Flushtoinside
ofpanel
Fig.B
(2)3"(7,6cm)
Screws
(1)3"(7,6cm)
Screw
Flushto
outsideof
panel
DOOR
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24-3/8"
(61,9) cm)
24-3/8"
(61,9) cm)
From outside
of panel
From outside
of panel