Installation Guide

38
2" (5,1 cm)
PARTSREQUIRED:
ROOF PANELS
48"x 96"
x4
3/4"GAUGE
BLOCK
Fig.A
3/4"
(1,9 cm)
Gauge
Block
Flushatpeak
Fig.B
Flushatpeak
Fig.B
TwoNails
DOOR
DOOR
Fig.C
Gauge
Block
3/4"
(1,9 cm)
Move to the opposite end of panel.
Maintainpanelushatpeak(Fig.B).
Use GAAgaugeblockfor3/4"
measurement along outside edge of
gable panel (Fig.C).
Secure panel with (2) 2" nails
in the corners.
2
1
BEGIN
Install (1) 48" x 96" panelwitha3/4"measurement
on the rafter (FigA,Fig.B).
Secure panel with (2) 2" nails in
the corners.
m
o
v
e
TwoNails
x2
7/16x48 x 96"
(1,1 x 121,9 x 243,2 cm)
x2
7/16x9-3/4x96"
(1,1 x 24,8 x 243,2 cm)
Roofpanelsmaycauseseriousinjuryuntilsecurelyfastened.
x2
7/16x23-7/8x48"
(1,1 x 60,6 x 121,9 cm)
x2
7/16x9-3/4xx23-7/8"
(1,1 x 24,8 x 60,6 cm)
Install all roof panels with the rough side facing up (painted grid lines side).