Installation Guide

47
3" (7,6 cm)
x3
PARTSREQUIRED:
DOOR INSTALLATION
Door-HingeBoardAssembly
4
3
5
Set right door on support DBAandalignuppercornertothe3/16"referencemark.
Ensure hinge board DBA is ush against wall panel.
Secure (1) 3" deck screw into the wall framing (top plate).
Install the TOP screw rst.
Marktheoutsidecenterofthedooropening.Measure3/16"eitherside
ofthecentermark;the3/16"markwillbethereferencemarktoalignthedooredges.
Install the 2nd 3" deck screw into the bottom wall framing (bottom plate).
Ensure the door is plumb (vertically level).
HINT: Pivot the hinge board using the rst installed 3" deck screw to help level the door.
When the door is level, install the 3rd 3" deck screw into the door framing (stud).
Temporary Support
DBA
1st Deck Screw
3" (7,6 cm)
2nd
Deck Screw
3" (7,6 cm)
3rd
Deck Screw
3" (7,6 cm)
L
E
V
E
L
MeasureandMark
3/16" (4,8 mm)
each side of center.
CENTER
3/8"(9,5mm)
3/8"(9,5mm)
3/8"(9,5mm)
RIGHT