Installation Guide

48
PARTSREQUIRED:
DOOR INSTALLATION
Door-HingeBoardAssembly
6
7
Set left door on support DBAandalignuppercornertothe3/16"referencemark.
Ensure hinge board DBA is ush against wall panel.
Secure (1) 3" deck screw into the wall framing (top plate).
Install the TOP screw rst.
Install the 2nd 3" deck screw into the bottom wall framing (bottom plate).
Ensure the door is plumb (vertically level). Maintain an even gap between the doors.
HINT: Pivot the hinge board using the rst installed 3" deck screw to help level and adjust the door gap
When the door is level, install the 3rd 3" deck screw into the door framing (stud).
Temporary Support
DBA
1st Deck Screw
3" (7,6 cm)
2nd
Deck Screw
3" (7,6 cm)
3rd
Deck Screw
3" (7,6 cm)
L
E
V
E
L
CENTER
3/8"(9,5mm)
3/8"(9,5mm)
3/8"(9,5mm)
LEFT
3/8"(9,5mm)
3/16" (4,8 mm)
Reference mark
3" (7,6 cm)
x3