Installation Guide

52
PARTS REQUIRED:
DOOR TRANSOM WINDOWS
You must caulk completely around window
frame and all exposed door panel edges
and trim to validate your warranty.
Use a paintable exterior rated caulk.
BEGIN
¸
1
From back side of door, measure 11-13/16" from inside edge of
door.
Mark center of window opening on door.
Position window in opening ush to bottom of window opening.
Center window on mark.
Use four screws to secure each window.
2
Apply high quality exterior-grade caulk behind frame
near edge before installing to seal window.
3/4" (1,9 cm)
Screws
x8
Your transom windows are installed.
FINISH
3/4" (1,9 cm)
x8
x2
BACK SIDE OF DOORS
Center window on mark
FRONT SIDE VIEW
Transom Window
11-13/16"
(30 cm)