Installation Guide

19
PARTS REQUIRED:
GABLE WALL 01 WITH DOOR
2" (5,1 cm)
x166
x1 x1
3" (7,6 cm)
x2
x1
69" (75,3 cm) Door Stiffener
OO Temporary Brace
23-7/8 x 84"
(60,6 x 213,4 cm)
x2
Install the left panel 1-1/2"
from the top plate.
Use a 2x3 spacer for
consistent measurement.
Secure panel with 2" nails
spaced 6" apart
on edges.
Install the right panel
 ush to installed panel,
as shown.
Ensure 64" (162,8 cm)
door measurement.
Use part OO as a
temporary brace.
Secure with (2) 3"
screws.
Secure panels with 2"
nails spaced 6" apart
on edges.
2x3
2x32x3
6" (15,2 cm)
1-1/2"
(3,8 cm)
BEGIN HERE
3/4"
(1,9 cm)
Flush Flush
OO Temporary Brace
4
3
64"
(162,6 cm)
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
3/4"
(1,9 cm)
Install (2) 11-7/8" x 84"
panels  ush to installed
panels and 1-1/2" from
the top plate.
Secure panels with 2"
nails spaced 6" apart
on edges.
Flush Flush
FlushFlush
5
Your 12' gable wall with
door is now assembled.
Carefully  ip the wall over.
FINISH
23-7/8"
(60,6 cm)
1-1/2"
(3,8 cm)
6" (15,2 cm)
3/4" Gauge
Block
3/4" Gauge
Block
Flush