Installation Guide

57
OPTIONAL:
DOOR LOCATED
ON 12' EAVE WALL
STANDARD:
DOOR LOCATED
ON 12' GABLE WALL
12' EAVE WALL 04 INSTALLATION
3" (7,6 cm)
x1
3" (7,6 cm)
x12
2
BEGIN
Place 12' eave wall centered on  oor.
1-1/2" (3,8 cm) overlap is to the top.
Secure wall with (1) 2" screw into 12' gable wall
bottom plate (Fig. A) and top plate (Fig. B).
Secure wall to bottom plate fi rst.
1
Nail lower edge of panels to  oor with 2" nails
spaced 6" apart.
Angle nails into  oor frame (Fig. C).
Nail panel to 12' wall stud with 1-1/2" nails
spaced 6" apart.
ENSURE PANEL CORNERS ARE FLUSH.
Your 12' eave wall 04 is now installed.
FINISH
2" (5,1 cm)
x27
1-1/2" (3,8 cm)
x13
2" (5,1 cm)
x2
PARTS REQUIRED
1-1/2" (3,8 cm)
Nails
2" (5,1 cm)
Nails
Flush
6" (15,2 cm)
6"
(15,2 cm)
2" (5,1 cm)
Screw
Fig. B
2" (5,1 cm)
Screw
Fig. A
Nail 2" nails  rst.
2" (5,1 cm)
Nails
3" (7,6 cm)
Nails
Fig. C
Secure wall top plate with (1) 3" screw
angled at the corner at an angle as shown
(Fig. D).
3
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
1-1/2"
(3,8 cm)