Installation Guide

49
16' WALL INSTALLATION
3" (7,6 cm)
x3
3" (7,6 cm)
x16
2
BEGIN
Place 16' wall centered on  oor.
The 1-1/2" (3,8 cm) overlap is to the top.
Use TJ as a temporary brace as shown.
Secure TJ with (2) 3" screws.
Secure wall with (1) 2" screw into 10' wall
bottom plate (Fig. A) and top plate (Fig. B).
Secure wall to bottom plate  rst.
1
Nail lower edge of panels to  oor
with 2" nails spaced 6" apart.
Angle nails into  oor frame
(Fig. C).
Nail panel to 10' wall stud with 1-1/2"
nails spaced 6" apart.
ENSURE PANEL CORNERS ARE FLUSH.
Your 16' wall is now installed.
FINISH
2" (5,1 cm)
x36
1-1/2" (3,8 cm)
x13
2" (5,1 cm)
x2
PARTS REQUIRED
2" (5,1 cm)
Nails
1-1/2" (3,8 cm)
Nails
Flush
6" (15,2 cm)
6"
(15,2 cm)
2" (5,1 cm)
Screw
Fig. B
2" (5,1 cm)
Screw
Fig. A
Nail 2" nails  rst.
2" (5,1 cm)
Nails
Fig. C
3" (7,6 cm)
Nails
Secure wall top plate with (1) 3" screw
at the corner at an angle as shown
(Fig. D).
3
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
x1
2 x 4 x 92-5/8" (5,1 x 10,2 x 235 cm)
TJ
Temporary Brace
TJ
3" (7,6 cm)
Screws
OPTIONAL:
DOOR LOCATED
ON 16' EAVE WALL