Installation Guide

50
PARTS REQUIRED:
16' WALL INSTALLATION
Secure wall with (1) 2" screw through
gable wall panel into 10' wall bottom
and top plates (Fig. A, Fig. B).
Secure wall to bottom plate  rst.
ENSURE PANEL CORNERS ARE FLUSH.
BEGIN
1
2
2" (5,1 cm)
x2
Flush
2" (5,1 cm)
Screw
Fig. B
2" (5,1 cm)
Screw
Fig. A
Remove temporary brace OO from installed 10' wall.
Place 16' wall centered on  oor.
1-1/2" (3,8 cm) overlap is to the top.
Use TJ as a temporary brace as shown.
Secure TJ with (2) 3" screws.
TJ
3" (7,6 cm)
Screws
3" (7,6 cm)
x2
x1
2 x 4 x 92-5/8" (5,1 x 10,2 x 235 cm)
TJ
Temporary Brace
1-1/2"
(3,8 cm)