Installation Guide

27
PARTS REQUIRED:
10' WALL 05
23-7/8" x 84"
(60,6 x 213,4 cm )
x1
2" (5,1 cm)
x100
1-1/2"
(3,8 cm)
x1 x1
3" (7,6 cm)
x2
x1
69" (75,3 cm) Door Stiffener
OO Temporary Brace
3-1/2"
(8,9 cm)
Install the left panel 1-1/2"
from the top plate.
Use a 2x3 spacer for
consistent measurement.
Secure panel with 2"
nails spaced 6" apart
on edges.
Install the right panel
ush to installed panel,
as shown.
Ensure 64" (162,8 cm)
door measurement.
Use part OO as a
temporary brace.
Secure with with (2)
3" screws.
Secure panel with 2"
nails spaced 6" apart
on edges.
2x3
6" (15,2 cm)
Flush Flush
OO Temporary Brace
4
3
64"
(162,6 cm)
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
Install 23-7/8" x 84"
panel ush to installed
panel and 1-1/2" from
the top plate.
Secure panel with 2"
nails spaced 6" apart
on edges.
Note the panel
lip-edge/square
edge orientation.
Flush
5
Your 10' WALL 05 is now assembled.
Carefully ip the wall over.
FINISH
BEGIN HERE
3/4"
(1,9 cm)
1-1/2"
(3,8 cm)
6" (15,2 cm)
3/4" Gauge
Block
SQUARE
EDGE
Flush
2x3
Flush
23-7/8"
(60,6 cm)