Installation Guide

41
Your 18' WALL 12 is now assembled. Carefully ip the wall over.
FINISH
PARTS REQUIRED:
18' WALL 12
2" (5,1 cm)
x200
3" (7,6 cm)
x2
x1
69" (75,3 cm) Door Stiffener
OO Temporary Brace
1-1/2"
(3,8 cm)
x1 x1
3-1/2"
(8,9 cm)
48 x 84" (121,9 x 213,4 cm )
x2
Install the left panel 1-1/2" from the top plate. Use a 2x3 spacer for consistent measurement.
Secure panel with 2" nails spaced 6" apart on edges.
Install the right panel ush to installed panel, as shown. Ensure 64" (162,8 cm) door measurement.
Use part OO as a temporary brace. Secure OO with with (2) 3" screws.
Secure panel with 2" nails spaced 6" apart on edges.
2x3
6" (15,2 cm)
Flush Flush
OO Temporary Brace
4
3
64"
(162,6 cm)
3" (7,6 cm)
Screw
Install 48" x 84" and 23-7/8" x 84" panels ush to installed panels and 1-1/2" from the top plate.
Secure panels with 2" nails spaced 6" apart on edges and 12" inside panel.
Note the panel lip-edge/square edge orientation.
Flush Flush
Flush
5
BEGIN HERE
3/4"
(1,9 cm)
1-1/2"
(3,8 cm)
6" (15,2 cm)
3/4" Gauge
Block
3/4" Gauge
Block
Flush Flush Flush
12"
(30,5 cm)
2x3
Flush
23-7/8" x 84"
(60,6 x 213,4 cm )
x1
23-7/8"
(60,6 cm)
SQUARE
EDGE
SQUARE
EDGE
SQUARE
EDGE
3" (7,6 cm)
Screw