Installation Guide

86
PARTS REQUIRED:
DOORS
BEGIN
1
Center trim ZJ over doors and secure
with (7) 2" nishing nails into framing, as shown.
2
Arrange trim AH, MDL and MDR as shown.
Square AH before fastening.
Fasten trim to each door from inside with 3/4" screws
(Fig. A, Fig B).
Your door trim is now installed.
FINISH
3/4" (1,9 cm)
Screws
MDL
AH
MDL
MDR
AH
MDR
ZJ
19/32" x 2-1/2" x 26 5/8" (1,5 x 6,3 x 67,6 cm)
AH
x2
x1
ZJ
19/32" x 2-1/2" x 72" (1,5 x 7,6 x 182,9 cm)
3/4" (1,9 cm)
x72
2" (5,1 cm)
Finishing Nails
2" (5,1 cm)
x7
You have 3 options for door trim, see Fig. C.
Fig. B
Trim Option 2
Customize your door trim; use 1 of 3 options:
Assembly for Option 1 is shown in Fig. A.
If you choose Option 2, reverse MDL and MDR.
If you choose Option 3, center AH horizontally.
Follow steps 1, 2 and 3.
Add or subtract more screws as needed.
Trim Option 3
CENTER
CENTER
Fig. C
Fig. A
AH
MDL or MDR
MDL or MDR
MDRx2
19/32" x 2-1/2" x 39-7/8" (1,5 x 6,3 x 101,3 cm)
MDL
x2
19/32" x 2-1/2" x 39-7/8" (1,5 x 6,3 x 101,3 cm)
Trim Option 1
CENTER
CENTER
CENTER