Installation Guide

21
3/4" Gauge
Block
BEGIN HERE
3/4"
(1,9 cm)
6" (15,2 cm)
6" (15,2 cm)
12" (30,5 cm)
12" (30,5 cm)
2" (5,1 cm)
PARTS REQUIRED:
10' WALL 02
x136
48 x 84"
(121,9 x 213,4 cm )
x2
Your 10' WALL 02 is now assembled.
Carefully ip the wall over.
FINISH
Flush Flush
SQUARE
EDGE
SQUARE
EDGE
Install 48" x 84" panel 1-1/2"
from the top plate.
Use a 2x3 spacer for
consistent measurement.
Secure panel with 2" nails
spaced 6" apart on edges
and 12" inside panel.
Note the panel
lip-edge/square edge
orientation.
2
Install the 48" x 84" and (2)
23-7/8" x 84" panels ush to
installed panels.
Locate panels 1-1/2" from the
top plate.
Secure with 2" nails spaced 6"
apart on edges and 12" apart
inside panel.
Note the panel
lip-edge/square edge
orientation.
3
23-7/8" x 84"
(60,6 x 213,4 cm )
x1
1-1/2"
(3,8 cm)
1-1/2"
(3,8 cm)
LIP EDGE
FlushFlush
2x3
2x3
23-7/8"
(60,6 cm)