Installation Guide

23
3/4" Gauge
Block
BEGIN HERE
3/4"
(1,9 cm)
6" (15,2 cm)
12" (30,5 cm)
2" (5,1 cm)
PARTS REQUIRED:
10' WALL 03
x164
1-1/2"
(3,8 cm)
1-1/2"
(3,8 cm)
1-1/2"
(3,8 cm)
48 x 84"
(121,9 x 213,4 cm )
x2
x2
11-7/8" x 84" (30,2 x 213,4 cm)
(x1 Left & x1 Right)
Your 10' WALL 03 is now
assembled.
Carefully ip the wall over.
FINISH
SQUARE
EDGE
Install 48" x 84" panel
1-1/2" from the top plate.
Use a 2x3 spacer for
consistent measurement.
Secure panel with 2" nails
spaced 6" apart on edges
and 12" inside panel.
Note the panel
lip-edge/square edge
orientation.
2
Install the 48" x 84" and (2)
11-7/8" x 84" panels ush
to installed panels.
Locate panels 1-1/2" from
the top plate.
Secure with 2" nails spaced
6" apart on edges and 12"
apart inside panel.
Note the panel
lip-edge/square edge
orientation.
3
LIP EDGE
LIP EDGE LIP EDGE
2x3
2x3
Flush Flush Flush
Flush FlushFlush
11-7/8"
(30,2 cm)
11-7/8"
(30,2 cm)