Installation Guide

48
10' GABLE WALL INSTALLATION
3" (7,6 cm)
x2
3" (7,6 cm)
x8
2
Place 10' gable wall on oor centered between
installed' walls.
Secure wall with 2" screws into top and bottom plates
(Fig. A, Fig. B).
Secure wall to bottom plate rst.
BEGIN
1
Nail lower edge of panels to oor with 2"
nails spaced 6" apart.
Angle nails into oor frame (Fig. C).
Nail panels to eave wall studs with
1-1/2" nails spaced 6" apart.
ENSURE PANEL CORNERS ARE FLUSH.
Your walls are now installed.
FINISH
CUT OUT AND REMOVE BOTTOM PLATE AT
DOOR OPENING.
2" (5,1 cm)
x10
1-1/2" (3,8 cm)
x26
2" (5,1 cm)
x4
PARTS REQUIRED
Secure wall top plates with 3" screws
at each corner at an angle (Fig. D).
3
STANDARD:
DOOR LOCATED
ON 10' GABLE WALL
OPTIONAL:
DOOR LOCATED
ON 10' EAVE WALL
2" (5,1 cm)
Screw
Flush
Flush
Fig. A
Fig. B
6"
(15,2 cm)
2" (5,1 cm)
Nails
1-1/2"
(3,8 cm)
Nails
6"
(15,2 cm)
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
Nail 2" nails rst.
2" (5,1 cm)
Nails
Fig. C
3" (7,6 cm)
Nails
Secure wall bottom plates to oor
with 3" nails (Fig. C).
2" (5,1 cm)
Screw