Installation Guide

71
24-3/8"
(61,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24-3/8"
(61,9 cm)
7/16 x 23-7/8 x 47-7/8"
(1,1 x 60,6 x 121,6 cm)
x1
2" (5,1 cm) Nails
Fig. D
NOTE: Measurements from inside of gable panels
23-7/8"
x 48"
Install 48" x 47-7/8" roof panel
ush to the installed panel and
ush at the peak (Fig. B).
Secure panel with (1) 2" nail in
each corner, as shown.
Move gable end rafter edge until it is 1/2"
from the 48" x 47-7/8" roof panel (Fig. C).
Finish securing panel with (1) 2" nail in the outside corners.
Repeat STEPS 3 - 4 to install the
23-7/8" x 48" roof panel, as shown.
3
4
5
PARTS REQUIRED:
10' x 14' ROOF PANELS
x16
2" (5,1 cm)
Maintain spacing between the center of the rafters at the lower edge of the panels (Fig. D).
Secure panels with (1) 2" nail into each rafter, as shown.
Move to the top of the panel and keep spacing between
the center of the rafters.
Secure panels with (1) 2" nail into each rafter.
7/16 x 48-7/8 x 48"
(1,1 x 121,6 x 121,9 cm)
x1
Move Gable
Move Gable
48"
x 48"
1/2"
(1,2 cm)
Gable
End Rafter
Fig. C
1/2"
(1,2 cm)
Gable
End Rafter
Fig. C
Flush
2" nail
in each
corner
Flush at
peak
Fig. B