Installation Guide

76
24-3/8"
(61,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24"
(60,9 cm)
24-3/8"
(61,9 cm)
2" (5,1 cm) Nails
Fig. D
NOTE: Measurements from inside of gable panels
3/4" GAUGE
BLOCK
Install 23-1/2" x 96" roof panel with a 3/4" measurement on the rafter (Fig A) and ush to the upper installed panels.
Secure panels with (1) 2" nail in each corner.
Install 23-7/8" x 47-7/8", 23-7/8" x 23-1/2 and 2nd 23-7/8" x 47-7/8" roof panels ush to the installed panels.
Secure panels with (1) 2" nail in each corner.
7
8
PARTS REQUIRED:
10' x 18' ROOF PANELS
x26
2" (5,1 cm)
2" (5,1 cm)
Nails
23-1/2" x 47-78"
23-1/2" x 47-78"
23-1/2" x 96"
23-7/8"
x
23-1/2"
Flush
Flush
Flush
Flush
Flush
Flush
x1
23-1/2" x 96"
(59,7 x 243,8 cm)
x2
23-7/8" x 47-7/8"
(59,7 x 121,9 cm)
x1
23-1/2" x 23-7/8"
(59,7 x 60,6 cm)
3/4"
(1,9 cm)
Fig. A
Gauge Block
6
Maintain spacing between the center of the rafters at the lower edge of the panels (Fig. D).
Secure panels with (1) 2" nail into each rafter, as shown.
Move to the top of the panel and keep spacing between the center of the rafters.
Secure panels with (1) 2" nail into each rafter.