Installation Guide

79
7-1/2" (19,1 cm) apart
approximately
CKA
CKA
VX
VX
3" (7,6 cm)
Screws
1-1/4" (3,2 cm)
Screws
FINISH
Your eave trim is now installed.
PARTS REQUIRED:
10' x 10' EAVE TRIM
x2
2 x 6 x 96" (5,1 x 15,2 x 243,8 cm)
VX
2
Install VX eave trim ush along edge of roof panel (Fig. A).
BEGIN
Repeat installation on opposite side.
Screw through roof panel into VX with 1-1/4" screws spaced approximately 7-1/2" apart, as shown.
Screw through roof panel into trim with 1-1/4" screws spaced approximately 7-1/2" apart.
Install CKA ush to edge of roof panel and ush to installed eave trim.
1
x56
1-1/4" (3,2 cm)
3" (7,6 cm)
x8
x2
2 x 6 x 25-1/2" (5,1 x 15,2 x 68,4 cm)
CKA
96"
(243,9 cm)
25-1/2"
(68,4 cm)
Flush
Fig. A