Installation Guide

80
PARTS REQUIRED:
10' x 14' EAVE TRIM
2
Install VF eave trim ush along edge of roof panel (Fig. A).
BEGIN
1
CKA
CKA
VX
VF
VX
VF
x2
2 x 6 x 96" (5,1 x 15,2 x 243,8 cm)
VX
1-1/4" (3,2 cm)
x76
7-1/2" (19,1 cm) apart
approximately
Screw through roof panel into VX with 1-1/4" screws spaced approximately 7-1/2" apart, as shown.
Screw through roof panel into trim with 1-1/4" screws spaced approximately 7-1/2" apart.
Install CKA and VF ush to edge of roof panel and ush to installed eave trim.
Repeat installation on opposite side.
VF
x2
2 x 6 x 48" (5,1 x 15,2 x 121,9 cm)
VF
3" (7,6 cm)
x8
FINISH
Your eave trim is now installed.
x2
2 x 6 x 25-1/2" (5,1 x 15,2 x 68,4 cm)
CKA
3" (7,6 cm)
Screws
1-1/4" (3,2 cm)
Screws
48"
(121,9 cm)
96"
(243,9 cm)
25-1/2"
(68,4 cm)
Flush
Fig. A