Installation Guide

82
PARTS REQUIRED:
CORNER TRIM
NOTE: 10' x 10' Model Shown.
x64
2" (5,1 cm)
10-3/4"
(27,3 cm)
FINISH
Your corner trim is now installed.
Repeat STEPS 1 - 2 for each corner of shed.
2" (5,1 cm)
Finishing Nails
Fig. A
Flush to
gable panel
Flush to
eave soft
83-1/2"
(212,1 cm)
83-1/2"
(212,1 cm)
Install gable end 83-1/2" corner trim under gable panel, (Fig. A) and ush to eave wall panel (Fig. B).
Secure with 2" nishing nails spaced evenly.
Install eave side 83-1/2" corner trim ush to eave soft and ush along seam of installed corner trim
(Fig. C). Secure with 2" nishing nails spaced evenly.
2
BEGIN
1
3/8" x 1-3/4" x 83-1/2" (1 x 4,5 x 212.1cm)
x8
Fig. C
Seam is ush.
Caulk seam before
painting trim.
Flush to
eave panel
Fig. B