Installation Guide

88
LEFT
DOOR
Mark and pre-drill holes for screws. Install bolt with screws supplied.
Drill 5/16" (7,9 mm) hole deep enough for bolt to slide into.
2
3
4
Place bolt on OO in open position with bolt end 3/8" (9,5 mm) down from frame.
Bolt is open when loop is contacting base (Fig A).
Fig. A
Fig. B
OO
OO
Place bolt on OO in open position with bolt end 1/2" (12,7 mm) up from oor.
Bolt is open when loop is connecting base (Fig. B).
Mark and pre-drill holes for screws. Install bolt with screws supplied.
Drill 5/16" (7,9 mm) hole deep enough for bolt to slide into.
Your spring bolts are now installed.
FINISH
5/16" (7,9 mm)
drill for bolt:
1" (2,5 cm) deep.
5/16" (7,9 mm)
drill for bolt:
1" (2,5 cm) deep.
1/2"
(12,7 mm)
OPEN POSITION
Spring is loose.
OVER DOOR
FRAME
FLOOR
Loop contacts
base
Loop contacts
base
OPEN POSITION
Spring is loose.
3/8" (9,5 mm)
with bolt
in open
position.
PRE-DRILL
(4) HOLES
PRE-DRILL
(4) HOLES
BEGIN
1
PARTS REQUIRED:
DOOR HARDWARE
5/16" (7,9 mm) Drill Bit
x2
x8
3/4" (1,9 cm)
x4
x4