Installation Guide

89
DOOR HARDWARE
BEGIN
1
Your door handle is now installed.
2
FINISH
RIGHT DOOR
1-3/4"
(4,4 cm)
TOP VIEW
1/4" Pre-drill and
1/2" Drill through.
Re-drill hole with 1/2" drill.
Keep drilled hole square to
trim to avoid breaking edge
of door stiffener.
Measure and mark location of hole on outside of right door as shown (Fig. A).
Pre-drill hole with 1/4" drill.
Fig. A
35-3/4"
(90 cm)
1-3/4" (4,4 cm)
1" (25 mm) x2
1-1/4" (32 mm) x2
x1
x2 x2
1" (2,5 cm)
1-1/4" (3,2 cm)
Secure backplate with 1" screws and handle with 1-1/4" screws as shown.
1/2" (13 mm) Drill Bit
1/4" (6 mm) Drill Bit
PARTS REQUIRED: