Installation Guide

79
PARTS REQUIRED:
GABLE TRIM
x88
2" (5,1 cm)
Your gable trim is now installed.
Install upper gable trim ZQR and ZQL ush to top of roof panels and ush at peak.
Install lower gable trim ZJR and ZJL ush to top of roof panels and ush to installed trim.
Secure trim with 2" nish nails evenly spaced, as shown.
Secure trim with 2" nish nails evenly spaced, as shown.
BEGIN
1
2
2" (5,1 cm)
Finishing Nails
ZJRZJL
ZQL ZQR
Flush to
roof panel
Flush to
roof panel
Repeat steps to install trim to the opposite gable.
FINISH
5/8 x 4 x 48-5/16
(1,6 x 10 x 123 cm)
5/8 x 4 x 48-5/16
(1,6 x 10 x 123 cm)
x2
5/8 x 4 x 36"
(1,6 x 10 x 91 cm)
ZJL
x2
x2
x2
5/8 x 4 x 36"
(1,6 x 10 x 91 cm)
ZJR
ZQL
ZQR
FlushFlush
Flush at peak