AssemblyInstructions

57
Solar Shed
Install Fascia Trim
All Building Sizes
12
12.Install Fascia KT angled for 10x8 and KT, HZ
for 10x12 and 10x16 on Short Wall. Keep flush
with bottom of 2x6 top plate, if using more than
one piece of fascia per side, butt tightly next to
one another. Secure using 2” (5cm) nails spaced
every 12” (30cm).
Install Fascia(s) to tall wall side of building in the
same manner using KI for 10x8 and KI, IJ for
10x12 and 10x16.
10 x 12 Building Parts List
❒ 1 KI Fascia Trim 1 x 4 x 93
3
/8” 2 x 10 x 237cm
❒ 1 IJ Fascia Trim 1 x 4 x 45
1
/2” 2 x 10 x 115.5cm
❒ 1 KT Fascia Trim angled 1 x 4 x 93
3
/8” 2 x 10 x 237cm
❒ 1 HZ Fascia Trim angled 1 x 4 x 45
1
/2” 2 x 10 x 115.5cm
10 x 8 Building Parts List
❒ 1 KT Fascia Trim angled 1 x 4 x 93
3
/8” 2 x 10 x 237cm
❒ 1 KI Fascia Trim 1 x 4 x 93
3
/8” 2 x 10 x 237cm
10 x 16 Building Parts List
❒ 1 KI Fascia Trim 1 x 4 x 93
3
/8” 2 x 10 x 237cm
❒ 2 IJ Fascia Trim 1 x 4 x 45
1
/2” 2 x 10 x 115.5cm
❒ 1 KT Fascia Trim angled 1 x 4 x 93
3
/8” 2 x 10 x 237cm
❒ 2 HZ Fascia Trim angled 1 x 4 x 45
1
/2” 2 x 10 x 115.5cm
Short Wall
KT HZ
2" Nails
This side
towards
building
2x6
This side
towards
building
Flush to
Top
Short Wall
KT
2" Nails
2x6
10 x 8
10 x 12
Flush to
Top
HZ
HZ
KT
On Tall Wall use KI and IJ
10 x 16
On Tall Wall use KI
On Tall Wall use KI and IJ
Short Wall