AssemblyInstructions

58
Solar Shed
ZO Overhang
Door
Top By 1/4" (.6 cm)
Top Of
Door
5-16" gap
Flush to
Outside
13-B: Position (ZO) under Hinge on
outside
face of Door, overhanging
top of Door
by 1/4”(.6cm), and
overhang 1/4” from top and edge
of Conti
nuous Hinge. Create a
5/16
” gap between door and (ZO)
be
fore attaching with screws.
To p
Bottom
Flush
Outside Face
of Door
3/4"
Scr
ews
Hinge
Lobe
13-A: Position Continuous Hinge on
edge of Door with lobe up an
d
overhanging outside face edge of
Doo
r. Piano Hinge should be flush
to top of Door as sh
own. Secure
with t
welve 3/4” (1.9cm) Hinge
scr
ews. Make sure there is a
scr
ew in each hole.
Installing Door
All Building Sizes
13
Building Parts List
1 pcs. — Doors
1 pcs. — Continuous Hinge
2 pcs. ZO Door Trim 5/8 x 3 x 72"
13A
13B-C
Important Note: Door can be hinged Right or left,
based on per
fence, by changing
which end of door “ZO
” overhangs.
Remove Door Spacers on Hinge side of Door only.
3/4" Screws in
End Holes(12
Total)
Top Of
Door
Right
Side
Door
Pre-attached door spacers
ZO
ZO