Instructions / Assembly

Desk Assembly Instructions

Your desk comes packaged in one box .

Parts List

1 x Table Top

1 x Back Panel

2 x Shelf Panels

4 x Table Legs

1 x Pouch

Hardware List

3 x Small Bolts

M6 x 35mm 5/16”

8 x Big Bolts

8 x Lock Washers

5/16” x 22mm

8 x Flat Washers

1 x Small Hex Key

M8 x 80mm

1 x Big Hex Key

4 x Floor Protectors

M5 x 60mmM4 x 60mm

Assembly

Step 1

x 4

Replaceable Parts

DO NOT use any sharp objects to open plastic wrapped components

as damage to product or components may result.

Carefully remove all of the components from the packaging and

set aside for assembly. Assemble on a soft surface to prevent

scratching the finish.

PAGE 1
Desk Assembly Instructions Your desk comes packaged in one box . DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching the finish.
PAGE 2
Assembly Step 3 Step 2 Back view B G C J C x3 B C B x2 * (C) Shelf Panels can be installed on the left or right side. A A Step 4 Step 5 B E A E B Back View Attach the (E) pouch to the (B) Back Panel Slats via Hook and Loop It is highly recommended to use coasters or mats beneath hot pans, plates, and glassware to protect the surfaces and finish of your furniture. Your style may differ from images. Care for your furniture by periodically tightening all bolts using the included hex key.