Specification

*DISCLAIMER: Descriptions regarding the products described herein are based solely upon information provided by the manufacturer and are
provided for informational purposes only. NOTHING CONTAINED HEREIN SHOULD BE CONSTRUED AS CREATING AN EXPRESSED OR
IMPLIED WARRANTY, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, EACH OF WHICH IS HEREBY DISCLAIMED.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. The final determination as to the
suitability of any product of Hanes Geo Components in any particular application rests solely with the user. Hanes Geo Components reserves the
right to alter or modify its products and descriptions at any time without notice.
2014-06-01
Silt Fence 3606-B36-D w lathe
Product # 76175 - Michigan
Hanes Geo Components preassembled Silt Fence 3606-B36-D w/ Lathe is a preassembled silt fence with
TerraTex SF-D woven geotextile, stapled to hardwood stakes with a Lathe, 6 feet on center.
Assembled Fence Characteristics
Silt Fence Geotextile
TerraTex SF-D
Geotextile Height / Length
36 in (0.914 m) x 100 ft (30.48 m)
Post Spacing
6 feet (1.83 m)
Post Height
36 inches (0.914 m)
Post Composition
Common Hardwood
Post Size
“B” 1.5 in x 1.5 in (2 inch nominal)
Fence Assembly
5 -16g Galvanized Staples/post
Lathe / Support netting or wire
Yes
The TerraTex SF-D is made up of polypropylene filaments. These filaments are woven to form a stable and
durable network such that the filaments retain their relative position. It is non-biodegradable and resistant to
most soil chemicals, acids, and alkali with a pH range of 3 to 12. TerraTex SF-D is manufactured to meet or
exceed AASHTO M288 supported and unsupported silt fence fabric requirements and the following
minimum average roll values:
Silt Fence Geotextile Properties
Minimum Average
Minimum Average
Roll Value
Roll Value
Property
Test Method
English
Metric
Grab Tensile MD
ASTM D-4632
124 lbs
550 N
Elongation MD
ASTM D-4632
15 %
15 %
Grab Tensile XMD
ASTM D-4632
124 lbs
550 N
Elongation XMD
ASTM D-4632
15 %
15 %
UV Resistance
ASTM D-4355
80% @ 500 hr
80% @ 500 hr
AOS*
ASTM D-4751
30 US Sieve
0.60 mm
Permittivity
ASTM D-4491
0.10 sec
-1
0.10 sec
-1
Flow Rate
ASTM D-4491
8 gal/min/ft
2
325.6 L/min/m
2
* Maximum Average Roll Value
5/2014