User Manual

 Step 13

Install the muffler and connect the fuel lines from the tank

to the engine.

Note: We used a fuel dot and T-fitting

on our model so the cowl won't have

to be removed to fuel the engine.

Note: You will need to use a Muffler

Right Angle Adapter (SAI120S140)

when installing the Saito engines.

 Step 14

Attach the cowling using four 4-40 x 1/2-inch

socket head screws, four pieces of cowl screw tubing

and four #4 washers. Install the propeller to complete

the engine installation.

Engine Installation (Glow)