User Manual

32
 Step 9
Slide the fuel tank into the fuselage with the stopper facing
toward the top of the fuselage. Use a rubber band to keep
the fuel tank from moving rearward in the fuselage.
 Step 10
Use two #2 x 1/2-inch sheet metal screws to secure the
battery cover in position behind the fuel tank.
The ignition battery should be placed
next to the fuel tank behind the firewall.
This is to keep as much separtation
between the ignition and the RX.
The battery pack should be installed
before installing the fuel tank. The model
was flown with the battery pack placed
here when using the Zenoh 20ei.
 Step 11
Trim the cowling as necessary to clear the muffler,
carburetor and head of the engine. Secure the cowling
using four 4-40 x 1/2-inch socket head screws, four
pieces of cowl screw tubing and four #4 washers.
Engine Installation (Gas)