User Manual

Required Parts

• Fuselage assembly • Front windscreen

• Side window (left and right) • Upper window

• Front seat bottom • Front seat back

• Rear seat bottom • Rear seat back

• Floor • Instrument panel

• Windscreen supports • Hook and loop

• Pilot

• #2 x 1/2-inch sheet metal screw (4)

Required Tools and Adhesives

• Switch harness • Medium CA

• Phillips screwdriver • Hobby knife

• Hobby scissors • 30-minute epoxy

• Canopy glue

 Step 1

Install the switch harness into the opening in the rear

seat bottom.

 Step 2

Use medium CA to glue the rear seat back to the rear

seat bottom.

 Step 3

Plug the switch harness into the battery and receiver. Slide

the rear seat into position, guiding the wires from the

switch harness behind the seat.

 Step 4

Glue the front seat back to the front seat bottom. Slide the

front seat into position.

Interior Detail Installation