User Manual

4
Radio and Power Systems Requirements
4-channel radio system (minimum) w/receiver Large Servo Arms (JRPA212) (3 pkgs)
12-Inch Servo Lead Extension (JRPA098) JR Charge Jack Switch (JRPA004)
18-inch Servo Lead Extension (JRPA099) (4) Choke Rings (JRPA029 (2)
Y-harness (Ailerons) (JSP98020) (Required when using 4-channel radio)
DS821 Digital Sport Hi-Torque Servo (JRPS821) (JSP20071) (6) or equivalent
The elevator installation will require:
Two servos and mixing through the radio
Or
Two servos and a JR® MatchBox™ (JPA0900) or a 6" standard reversing Y-harness (EXRA320)
Or
A standard rotation servo and a reverse rotation servo and a standard Y-harness
Recommended JR
®
, JR
SPORT
and Spektrum
Systems
XP9303 XP7202
DX7 XP6102
XS600
Recommended Setup–Gas/Glow
Zenoah
®
20cc Electronic Ignition(ZENE20EI), OR
38mm stand-offs (Zenoah only) (EVO3307)
RF choke ring (gas only) (JRPA029)
Saito
180 AAC with Muffler (SAIE180 or SAIE180GK)
Muffler Right Angle Adapter (Saito only) (SAI120S140)
16x6 Propeller
Propeller nut
Recommended Setup–Electric
E-flite
®
Power 110 BL Outrunner Motor (EFLM4110A)
Castle Creations 85A ESC (CSEPHX85HV)
2 Thunder Power 8–9S Li-Po Battery Packs
Propeller ((APC17010E) or (APC18080E)
Propeller nut
FS One
With FS One
you get more than photorealistic fields, gorgeous
skies and realistic-looking aircraft. You get incredibly advanced
aerodynamic modeling that simulates every possible aspect
of real-world flight.
Zenoah 20cc
ZENE20EI
Saito 1.80 Golden Knight AAC
SAIE180GK
JR XP6102
JR XP9303
Spektrum DX7
HANS2000
E-Flite Power 110
EFLM4110A