User Manual
16
Required Parts
• Fuselage •#8 lock washer (4)
• Wheel pant (left and right) •#8 washer (4)
• 8-32 nylon lock nut (4) • 3
1
/
2
" wheel (2)
• 3/16" wheel collar (4) •#4 washer (2)
• 8-32 x 3/4" socket head bolt (4)
• 4-40 x 1/2" socket head screw (4)
Required Tools and Adhesives
• Hex wrench: 5/32" • Ruler
• Felt-tipped pen • Square
• Adjustable wrench (small)
Step 1
Install the axles in the landing gear. Secure the axles using
an adjustable wrench and the nuts provided with the axles.
Step 2
Install the landing gear using four 8-32 x 3/4" socket head
bolts and four #8 lock washers
Step 3
Install the following items onto the axle: wheel pant, 3/16"
wheel collar, wheel then another 3/16" wheel collar.
Step 4
Secure the pant in place using a 4-40 x 1/2" socket head
screw and #4 washer. Use threadlock on the screw to
prevent it from coming loose in flight.
Section 4 – Landing Gear Installation