User Manual

Section 7 – Elevator Assembly

Required Parts

• Stabilizer (right and left)

• Fuselage

• Stabilizer tube (small)

• Stabilizer tube (large)

Required Tools and Adhesives

• String

• Small weight

• Control horn (2)

• Robart hinge points

• Phillips screwdriver

• Servo w/hardware (2)

Step 1

Pass a string with a small weight through the two

holes in the stabilizer. The string then passes back

out the opening for the servo.

Step 2

Tie the string around the servo lead. Pull the servo

lead through the openings in the stabilizer. Install the

servo using the hardware provided with the servo.

Step 3

Center the elevator servo using the radio system.

Install a servo arm onto the servo.