User Manual

Section 7 – Elevator Assembly

Step 10

Glue the elevator hinges in place using the same

techniques used to hinge the ailerons. The shortened

hinges will be installed into the stabilizer towards the

root. After hinging the elevator, use the same

technique to seal the elevator’s hinge gaps. Use Clear

UltraCote

for the bottom of the elevator.

Step 11

Assemble and install the elevator linkage using a

" titanium linkage.

Step 12

Repeat Steps 1 through 11 for the remaining

stabilizer and elevator.

Step 13

Insert the stabilizer tubes into one half of the

stabilizer. The small tube is located at the leading

edge of the stabilizer.