User Manual

Section 9 – Landing Gear Installation

Required Parts

• Fuselage • Landing gear fairing

• 10-32 x 1" socket head bolt (4)

• 10-32 nylon lock nut (4)

• #10 lock washer (4)

• 1/4-20 x 2” nylon bolt

Required Tools and Adhesives

• Hobby knife • 5/32" hex wrench

• Adjustable wrench (small)

Step 1

Install the axles in the landing gear. Secure the

axles using an adjustable wrench and the nuts

provided with the axles.

Step 2

Install the landing gear using four 10-32 x 1" socket

head bolts, four #10 lock washers and four

10-32 nylon lock nuts. (The lock nuts are placed

inside the fuselage.)

Step 3

Attach the landing gear fairing using two 4-40 x 3/4"

bolts and two #4 washers.