User Manual

Additional Required Tools and Adhesives
4
Additional Required Tools and Adhesives
Tools
• 4-40 tap
• 8-32 tap
• Adjustable wrench (small)
• Canopy scissors
• Drill (drill press preferred)
• Drill bit: 1/16", 3/32", 7/32", 1/4", #43, 1/2",
5/32", 9/64"
• Drum sander
• Cut-off wheel
• Velcro straps
• Flat blade screwdriver w/short handle
• Foam: 1/2"
• Hex wrench: 3/32"
• Hobby knife
• Masking tape
• Phillips screwdriver (small)
• Pliers
• Scissors
• Square
• Syringe
• Tap handle
• Toothpicks
Adhesives
• 6-minute epoxy
• 30-minute epoxy
• Thick CA (cyanoacrylate) glue
• CA remover/debonder
• Pacer Z-42 Threadlock
• Formula 560-canopy glue
• Shoo Goo
Other Required Items
• Epoxy brushes
• Felt-tipped pen or pencil
• File
• Measuring device (e.g. ruler, tape measure)
• Mixing sticks for epoxy
• Paper towels
• Petroleum jelly
• Rubbing alcohol
• Sanding bar
• Sandpaper (coarse)
• Clear UltraCote® (HANU964)
• Covering Iron (HAN101)
• Dental floss or string
HD 1/2 Servo Arm 4-40: JR (8) HAN3574
3D XL 1/2 Servo Arm 4-40: JR (1) HAN3578
8-32 Swivel Clevis Horn (4) HAN3614
4-40 x 4-40 HD Ball Link (5) HAN3616
Tailwheel, Lg Haigh 12-22 lb (1) OHI160
Super Hinge Points (4) ROB309
Dura-Collars, 3/16" (1) DUB141
Axle Shafts, 3/16 x 2" (1) DUB249
Fuel Tank, 32oz (1) DUB690
Pro-Lite Wheels, 3-1/2" (1) HAN308
Titanium Pro-Links 4-40 x 2-1/2" (1) HAN3552
Titanium Pro-Links 4-40 x 3-1/2" (1) HAN3554
Titanium Pro-Links 4-40 x 4-1/2" (1) HAN3556