User Manual

4
Additional Required Tools and Adhesives
Tools
• 4-40 tap
• 8-32 tap
• Adjustable wrench (small)
• Canopy scissors
• Drill (drill press preferred)
• Drill bit: 1/16", 3/32", 7/32", 1/4", #43, 1/2",
5/32", 9/64"
• Drum sander
• Cut-off wheel
• Velcro straps
• Flat blade screwdriver w/short handle
• Foam: 1/2"
• Hex wrench: 3/32"
• Hobby knife
• Masking tape
• Phillips screwdriver (small)
• Pliers
• Ruler
• Sandpaper
• Scissors
• Square
• Syringe
• Tap handle
• Toothpicks
Adhesives
• 6-minute epoxy
• 30-minute epoxy
• Thick CA (cyanoacrylate) glue
• CA remover/debonder
• Pacer Z-42 Threadlock
• Formula 560-canopy glue
• Shoo Goo
• Masking tape (3M blue recommended)
Other Required Items
• Epoxy brushes
• Felt-tipped pen or pencil
• File
• Measuring device (e.g. ruler, tape measure)
• Mixing sticks for epoxy
• Paper towels
• Petroleum jelly
• Rubbing alcohol
• Sanding bar
• Sandpaper (coarse)
• Clear UltraCote® (HANU964)
• Covering Iron (HAN101)
• Dental floss or string
Optional Hangar 9
®
1/3 Scale Hardware Package
(HAN1220, JR/HAN1221, Futaba)
• Tail Wheel Assembly with Hardware (OHI130)
• 4-40 1/2 3D arm (11/4") Futaba (2) (HAN3579)
• 4-40 Ball Links (7) (ROC87)
• 4-40 1/2 HD Arm (1") Futaba (4) (HAN3575)
• 8-32 Swivel Control Horns (6) (ROC01B)
• 4-40 Solder Link (2) (DUB305)
• 4-40 Rod, Threaded one end (6) (DUB802)
• 3/16" Wheel Collars (2) (DUB141)
• 3
1
/
2
" Wheels (2) (DUB350L)
• 3/16" Main Axles (DUB249)
• 4
1
/
2
" 4-40 Threaded Pro-Links (2) (HAN3556)
• Super Hinge Points (24) (ROB309)
• 5" 4-40 Threaded Pro-Links (2) (HAN3557)
• 4-40 1/2 3D Arm (11/4") JR (4) (HAN3578)
• 32 oz Fuel Tank (DUB690)
• 4-40 1/2 HD Arm (1") JR (4) (HAN3574)