User Manual

Optional Parts and Accessories

• Fieldmate Prebuilt Field Box (HAN117) • MOSFET Power Panel (HAN106)

• Metered Glow Driver w/Ni-Cd and Charger (HAN7101) • PowerPro

™

12V Starter (HAN161)

• Manual Fuel Pump (HAN118) • Double Vision

™

Fast Field Charger (HAN114)

• Aluminum Transmitter Case for Single Tx (HAN124) • Digital Variable Load Voltmeter (HAN171)

• Long Reach Glow Plug Wrench (HAN2510) • Super Glow Plug (EVOGP1)

• Transmitter Stand (HAN2525) • Angle Pro Throw/Incidence Meter (HAN192)

• Hangar 9 Straw Hat (HANP303) • Sealing Iron ( HAN101)

• Sealing Iron Sock (HAN141) • Heat Gun (HAN100)

• Covering Glove (HAN150) • Trainer Power System Propeller (EVOE100P)

Required Tools and Adhesives

• #64 Rubber Bands (ARC064) • 4-Way Wrench (DUB810)

• Felt-tipped pen • Adjustable wrench

• 30-minute Epoxy (HAN8002) • Hobby knife

• Phillips screwdriver: #2 • Paper towels

• Rubbing alcohol • Masking tape

• Ruler • Hobby scissors

• Thin CA (MEUM5T1OZ) • Epoxy brush

EasyCote

™

Covering Colors

• White (HANU70000) • Black (HANU70800)

• Orange (HANU70700) • Silver (HANU70900)

Before Starting Assembly

Before beginning the assembly of the Alpha RTF with DSM, remove each part from its bag for inspection. Closely inspect

the fuselage, wing panels, rudder, and stabilizer for damage. If you find any damaged or missing parts, contact the

place of purchase.

If you find any wrinkles in the covering, use a heat gun or sealing iron to remove them. Use caution while working around

areas where the colors overlap to prevent separating the colors.

HAN100 – Heat Gun

HAN150 – Covering Glove

HAN101 – Sealing Iron

HAN141 – Sealing Iron

Sock

12843.1_HAN_Alpha40_SpektrumManual.indd 4 6/4/10 10:17:50 AM