User Manual

Warning

Additional Required Tools and Adhesives

Field Equipment Required

Optional Field Equipment

Tools

• Adjustable wrench

• Drill

• Drill bit: 5/64", 3/32”

• Hobby Knife (XAC3126)

• Phillips screwdriver (small)

Adhesives

• 30-Minute Epoxy (HAN8002)

• Thick CA (cyanoacrylate) Glue (PAAPT02)

• CA Remover/Debonder (PAAPT16)

• Masking Tape (MMM20901)

Other Required Items

• 2

" spinner (white) (EVOE0610S recommended)

• Epoxy Brushes (DUB345)

• Felt-Tipped Pen (PAR10400)

• File

• Measuring device (e.g. ruler, tape measure)

• Mixing Sticks for Epoxy (DUB346)

• Paper towels

• Rubbing alcohol

• Wax paper

An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open

areas, preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included

with your radio and engine.

• Propeller (EVOE0610P recommended)

• Fuel (10%–15% nitro content)

• Glow Plug Wrench (HAN2510)

• Glow Plug Igniter with Charger (HAN7101)

• Glow Plug (HAN3001/3006)

• Manual Fuel Pump (HAN118)

• #64 Rubber Bands (ARC64)

• Start-Up Field Pack (HANSTART)

• 4-Way Wrench (DUB701)

• Fieldmate (HAN117)

• Cleaner & towels

• Extra Glow Plugs (HAN3001/3006)

• Blue Block After Run Oil (EVOX1000)

• Power Panel (HAN106)

• 12V 7Ah Sealed Battery (HAN102)

• PowerPro 12V Starter (HAN161)