User Manual

Section 1: Joining the Wing Halves
6
Required Parts
• Right wing panels • Left wing panel
• Wing joiner tube
Required Tools and Adhesives
• Hobby knife
Skip to Section 2 if you plan on joining
the wings together permanently.
Step 1
Locate the wing joiner tube. Slide the tube into one
of the wing panels.
Step 2
Slide the remaining wing panel onto the tube tightly
against the first panel.
Step 3
Apply the clear tape to the joint, starting at the front
of the servo tray. Wrap the tape around the leading
edge, then onto the top of the wing. Continue around
the trailing edge of the wing, back to the servo tray.
Trim the excess tape using a hobby knife.