User Manual

Section 2: Gluing the Panels Together (Optional)

Required Parts

• Right wing panels • Left wing panel

• Wing joiner tube

Required Tools and Adhesives

• Masking tape • 30-minute epoxy

• Epoxy brush • Mixing stick

• Rubbing alcohol • Paper towels

• Hobby knife

The two wing panels can be glued together if

you choose to do so. Read through the steps

and wait to mix the epoxy until the steps are

fully understood.

Step 1

Locate the wing joiner tube. Slide the tube into one

of the wing panels.

Step 2

Mix 1/2 ounce of 30-minute epoxy. Apply the

epoxy to the exposed wood at the root rib.

Step 3

Slide the remaining wing panel onto the tube tightly

against the first panel. Use masking tape on the top

and bottom of the wing to hold the panels tightly

together until the epoxy cures.

Hint: Use a paper towel moistened with

rubbing alcohol to clean up any epoxy before

it has a chance to cure.