User Manual

Parts Needed

• Assembled aircraft

• Plastic canopy

• Mounting screws (small) (4)

• Trim tape

Tools and Adhesives Needed

• Sharp hobby knife

• Scissors

• Canopy glue (Pacer 560)

• Phillips screwdriver

Step 1. Locate the canopy.

Step 2. Trial fit the canopy carefully along the fuselage and use

a felt-tipped pen to mark where the canopy should be trimmed.

Step 3. Trim as necessary to make for a good fit. When you’re

satisfied with the fit, attach the canopy with canopy glue. Use

masking tape to hold the canopy in place while the glue cures.

Section 17: Installing the Canopy