User Manual

20
DeNight Special 50 ARF Assembly Manual
􀀀 Step 8
Connect a 6-inch servo extension lead to the ESC.
Secure the connection with dental oss so that it
cannot come loose.
􀀀 Step 9
Feed the ESC battery, switch and signal leads through
the cutout in the right-hand side of the bulkhead.
Attach the ESC to the right-hand lower side of the
motor box with double-sided adhesive tape.
􀀀 Step 10
Connect the motor and ESC leads. Use small cable
ties to secure the leads to the standoffs so they
cannot interfere with the operation of the motor.
􀀀 Step 11
Use a hobby knife to remove the covering from the
arming switch mounting hole in the lower right side
of the fuselage. Install the arming switch with the
hardware provided with the ESC.
􀀀 Step 12
Use a hobby knife to remove the covering from the
cooling exit on the lower fuselage. Cut the covering
1/8 inch inside the opening and use a sealing iron to
attach the covering to the sides of the cutout. This will
prevent the covering coming loose in the future.