User Manual

Packaged in Kit
Fuselage with hatch 1
Right wing 1
Left wing 1
Stabilzer with elevator halves 1
Fin and rudder 1
Cowl 1
Wheel pants 2
Landing gear 1
Cowl Bag
Cowling 1
2 1/2-inch spinner with hardware 1
4-40 x 1/2-inch Allen head machine screws 4 cowl
#4 steel washer 4 cowl
Silicone tubing (1/4 inch) 4 cowl
Rudder & Elevator Bag
Elevator joiner 1 elevator
Hinges 6 elevator
Snap keeper 2 rudder and elevator
Nylon clevis 2 rudder and elevator
Safety silicone keeper 2 rudder and elevator
Engine Bag
Fuel tank 11 oz 1
EZ link with hardware 1 throttle
Nylon clevis 1 throttle
Safety silicone keeper 1 throttle
Hook and loop straps, 9 inch 2 Rx and EP battery
Plywood fuel tank brace 1 fuel tank
Plywood pushrod supports - long 2 throttle pushrod
Plywood pushrod supports - short 2 throttle pushrod
Pushrods
3 inch with Z-bend and threads 2 aileron
Pushrod housing 10 1/2 inch 1 throttle
17 inch with Z-bend & threads 1 throttle
22 3/4 inch with 90 degree bend and threads 1 rudder
22 1/8 inch with 90 degree bend and threads 1 elevator
Wing Bag
Hardwood servo blocks 4 ailerons
4-40 x 3/8-inch Allen head machine screws 2 canopy
#4 steel washers 2 wing
#4 x 3/8 wood screws 8 aileron covers
Nylon clevis 2 ailerons
4-40 x 5/8-inch Allen head machine screws 2 wing
Safety silicone keeper 2 ailerons
Engine Mount Bag
Small nylon engine mount 2 engine
8-32 x 3/4-inch bolts 4 engine mount
8-32 blind nuts 4 engine mount
#8 steel washers 4 engine mount
48mm standoffs 4 motor
8-32 x 2 1/4-inch Phillips head screws 4 motor
6-32 x 1-inch Allen head machine screws 4 engine
#6 steel washer 4 engine
6-32 nylon lock nut 4 engine
Landing Gear Bag
5/32-inch axle with nut 2 wheels
4-40 x 3/8-inch Allen head machine screws 2 wheel pants
# 4 steel washers 2 wheel pants
8-32 x 3/4-inch Phillips head machine screws 3 landing gear
#8 steel washers 3 landing gear
5/32-inch wheel collars 4 axles
2.5mm x 5mm Allen head machine screws 4 wheel collars
Bagged Separately
Pilot bust and head 1 canopy
3/4-inch x 15-inch aluminum wing tube 1
2 3/4-inch wheels 2
Receiver and fuel tank support foam 1 Rx and EP battery
EP battery tray 1
4-40 x 1/2-inch Allen head machine screw 1 EP battery tray
# 4 steel washer 1 EP battery tray
Included Parts Listing
3
DeNight Special 50 ARF Assembly Manual