User Manual
37
DeNight Special 50 ARF Assembly Manual
Step 23
Remove the template, hatch and cowling then use a
tapered reamer to make a hole in the cowling for the
needle valve.
Step 24
Connect the remote glow lead to the glow plug, and
the ground lead to an engine mounting bolt.
Step 25
Slide an exhaust deector onto the mufer exit. Use
the cable ties provided with the deector to secure it
to the mufer and use sidecutters to trim the excess
from the cable ties.
Step 26
Slide the cowling part way over the engine. Insert the
fuel ll line from the tee tting through the fuel dot
body and install the remote glow jack in the hole in the
left-hand side of the cowling.