User Manual

41
DeNight Special 50 ARF Assembly Manual
Final Assembly
Parts Required
Fuselage Wing panels
Canopy Wing tube
#4 steel washers (2)
4-40 x 3/8-inch Allen head machine screws (2)
4-40 x 5/8-inch Allen head machine screws (2)
9-inch servo extensions (2)
Tools Required
3/32-inch hex wrench Dental oss
Thin CA
􀀀 Step 1
Connect the battery lead to the switch and secure with
dental oss. Apply a very small drop of thin CA to the
knot to prevent it coming loose.
􀀀 Step 2
Plug the male lead from the switch into the battery
port of the receiver.
􀀀 Step 3
Plug the rudder, elevator and throttle servo leads into
their corresponding receiver ports.
􀀀 Step 4
Plug a 9-inch servo extension lead into the aileron
and an auxiliary channel port in the receiver. Feed the
other end of the leads under the radio tray and out the
aft hole in the left and right wing roots.