User Manual

Introduction

The FuntanaX 50 can do it all—harriers, torque rolls, blenders, and almost anything else you can dream up. It’s all

possible, thanks to an extremely lightweight, all-wood airframe and big control surfaces that give the FuntanaX 50 a very

impressive thrust-to-weight ratio and crisp control authority at any airspeed. The genuine UltraCote® trim scheme and

factory painted parts, such as the cowl and wheel pants, complement the performance perfectly.

Contents of Kit

Radio and Power Systems Requirements

• 6-channel radio system (minimum) • 537 Standard Servo (JRPS537) (5) or equivalent

• 9" Servo Lead Extension (JRPA097) (2) • 12" Servo Lead Extension (JRPA098) (2)

• Large Servo Arm (JRPA212) (2) • Propeller (low pitch, large diameter recommended)

Recommended JR Systems

• PCM10X

• XP8103

• X-378

• XP662

• XF631

Recommended Power Systems

• .40–.48 2-stroke

• .40–.82 4-stroke

• Power 60 Brushless Outrunner

JR XP6102

JR XP9303

Evolution .46NT

EVOE0460

Saito .82 AAC

SAIE082A

Power 60 Brushless

Outrunner Motor,400KV

EFLM4060A

Large Parts:

A. Wing HAN4151

B. Fuselage HAN4152

C. Tail Set HAN4153

D. Side Force Generator Set HAN4154

E. Canopy HAN4155

F. Cowling HAN4157

G. Fiberglass Wheel Pants HAN4158

H. Aluminum Landing Gear HAN4159

I. Fuel Tank (Assembled) HAN4162

J. Decal Set HAN4161

Items Not Shown:

Hardware Pack HAN4160

Tail Wheel Assembly HAN4163

" (57mm) Wheels HAN303

Carbon Fiber Tail

Support Rod Set HAN4156

C D