User Manual

128
LIGHTING CONTROLLER OPERATION
• The lighting controller has 12 modes available. Cycle
through the modes and select the one that best suits
your personal requirements.
• The chart has the recommended modes for cruise,
emergency and standard fl ight.
• Use Y-harness to connect the red and green
navigation lights to port 2 of the lighting controller.
• A connecter is required (not included) to connect the
battery. Power the lighting using a 3S LiPo battery
with a voltage of 11.1V. Do not use a higher voltage,
as this will damage the system. Using a lower voltage
will not operate the lighting correctly.
* The lights can be plugged into any of the ports, as well
as the Y-harness. This will allow the navigation lights to
work individually or in different confi gurations. Feel free to
experiment with the connections.
Power
Mode Button
Ports
1 2 3 4
Black (–)
Red (+)
Port 1 (Landing Light A) Port 2 (Red/Green Navigation) Port 3 (Clear Tail Navigation) Port 4 (Landing Light B)
Mode 1 On (Steady) On (Steady) On (Steady) On (Steady)
Mode 2 Off On (Steady) Off On (Steady)
Mode 3 On (Steady) Flash Flash Flash Alt
Mode 4 Flash Alt Flash (2x fast) Flash (2x fast) Flash Alt
Mode 5 (Cruise) All fl ash All Flash All Flash All Flash
Mode 6 On (Steady) Flash (2x fast) Flash (2x fast) On (Steady)
Mode 7 On (Steady) Flash (2x slow) Flash (2x slow) Flash (1x slow)
Mode 8 Flash (2x fast) Flash (2x fast) Flash (2x fast) Flash (2x fast)
Mode 9 On/Off (3rd) On/Off (1st) On/Off (1st) On/Off (2nd)
Mode 10 (Emergency) Flash (2x fast) Flash (2x fast) Flash (2x fast) Flash (2x fast)
Mode 11 (Standard fl ight) Flash (slow alt) Flash (slow) Flash (slow) Flash (slow alt)
Mode 12 Flash Circular (#1) Flash Circular (#2) Flash Circular (#2) Flash Circular (#3)