User Manual

  Step 10

Tie a wheel collar onto a piece of string. Lower the string

into the opening for the aileron servo. Tip the wing so the

tip is facing up and lower the string through the wing.

Guide the string to exit the hole in the top of the wing near

the root.

  Step 11

Tie the string to the aileron servo extension. Use the string

to pull the extension through the wing and out of the hole

at the wing root. Use tape to keep the extension from

falling back into the wing.

  Step 12

Place the aileron servo into position on the wing. Use

four 2mm x 8mm sheet metal screws to attach the aileron

servo cover to the wing.

 Step 13

Repeat Steps 2 through 12 for the remaining aileron servo.

Section 2: Aileron Servo Installation

Step 11 Photo